Hale Formation

Age: Early Pennsylvanian Period, Morrowan Series
Distribution: Northern Arkansas, Ozark Plateaus; southern Missouri and northeastern Oklahoma
Geology: The Hale Formation is made up of two members: a lower Cane Hill Member and an upper Prairie Grove Member. The Cane Hill Member is typically composed of dark gray silty shale interbedded with siltstone and thin-bedded fine-grained sandstone. Some lithologies are locally calcareous. Isolated thick to massively bedded sandstones sometimes are present. Fossils are principally found associated with the calcareous units and include various mollusks, brachiopods and other groups. The lower contact of the Cane Hill Member marks the Mississippian-Pennsylvanian boundary in north Arkansas.

An upper Mississippian age sequence mapped on the Geologic Map of Arkansas as the lower part of the Cane Hill Member of the Hale Formation in north-central Arkansas has been offered as a separate unit called the Imo Formation (Original reference: M. Gordon, Jr., 1964, U. S. Geol. Survey Prof. Paper 460, p. 34; Type locality: Sulphur Springs Hollow, SE, SE, Sec. 3 & NW, NW, Sec. 11, T13N, R17W; Searcy County, AR.). This sequence is a fossiliferous gray to black shale with some fine- to coarse-grained, phosphatic sandstone and conglomeratic limestone. Upper-most Mississippian age fossils are common in some intervals and include bivalves, gastropods, cephalopods, brachiopods, crinoids, trilobites, palynomorphs, plant material, and others. The upper boundary is poorly defined and may be a shale on shale contact while the base appears to be conformable with the Pitkin Limestone. The maximum thickness of this sequence cannot be determined without a clear definition of its contacts, but descriptions have indicated a range from 200 to 340 feet.

The Prairie Grove Member is composed of thin to massive, often crossbedded, frequently pitted ("honeycomb weathering"), light-gray to dark-brown, limy sandstone or variously sandy limestone with lenses of relatively pure, crinoidal, highly fossiliferous limestone and oolitic limestone. Prairie Grove Member outcrops frequently have a mottled appearance when fresh. Fossils are common but generally fragmental. The fossil fauna includes: crinoids, bryozoans, brachiopods, algae, corals, trilobites, mollusks, and microfossils. The lower contact of the Prairie Grove is considered unconformable. The Hale Formation (Cane Hill Member) rests with pronounced unconformity upon older strata. The reported thickness of the Hale Formation ranges from a few feet to more than 300 feet.
Original reference: G. I. Adams and E. O. Ulrich, 1905, U. S. Geol. Survey. Geol. Atlas, Folio 119. L. G. Henbest, 1953, Am. Assoc. Petroleum Geologists Bull., v. 37, no. 8.
Type locality: Named for Hale Mountain, vicinity of Cane Hill, Washington County, Arkansas; Well exposed beside Arkansas State Highway 59 for 3 miles along the road south of Evansville in SE, Sec. 35, T13N, R33W

	Cane Hill Member along McElroy Gap road, Newton County, Arkansas.
	Prairie Grove Member near Jasper, Newton County, Arkansas.

Bloyd Formation/Shale

Age: Early Pennsylvanian Period, Morrowan Series
Distribution: Northern Arkansas, Ozark Plateaus; eastern Oklahoma
Geology: The Bloyd Formation consists of (in ascending order): the Brentwood Limestone Member, the Woolsey Member, Dye Shale Member, Kessler Limestone Member, and the Trace Creek Shale Member, which is considered a part of the Atoka Formation by many recent workers. The Brentwood Limestone Member is a sequence of limestones separated by thick intervals of dark shale. The normal sequence usually has 2 to 4 limestone intervals; however, east of the type region the unit becomes more sandy. The Woolsey Member is composed of terrestrial sediments comprised of dark-gray, fissile shale, often interbedded with thin siltstones. A thin coal bed, called the Baldwin Coal, occurs at or near the top of the Woolsey Member. East of Washington County, the Woolsey is replaced by a thick, fine- to medium-grained, cross-bedded sandstone facies commonly referred to as the Middle Bloyd Sandstone. This unit frequently contains quartz granules and is a common bluff-former. The Middle Bloyd Sandstone is normally mapped as part of the Dye Shale. The marine deposited Dye Shale Member is predominantly a dark-gray shale with scattered calcareous concretions. Where underlain by the Woolsey Member, the Dye Shale frequently has a bed of calcareous sandstone with scattered clay pebbles and quartz granules, called the caprock, at its base. The Kessler Limestone Member is either a single unit of limestone or a sequence of limestone and shale interbedded. The limestones are bioclastic, oolitic, and contain abundant oncoliths, traces of clay-pebble conglomerate, and minor amounts of calcareous sandstone. The Kessler Member appears to be absent east of central Madison County. The Trace Creek Shale Member is composed of dark-gray shales with some thin beds of sandstone. The sandstone beds become thicker and more common toward the top of the unit. Fossils of most common invertebrate phyla are known mostly from the limestones and calcareous sandstones of the Bloyd Formation. The base of the formation is considered conformable, but unconformities are recognized at the base of the Dye Shale and at the base of the Trace Creek Member. Typical thicknesses for the Bloyd Formation range from 175 to 200 feet.
Original reference: A. H. Purdue, 1907, U. S. Geol. Survey Geol. Atlas, Folio 154.
Type locality: Named from Bloyd Mountain, 9 miles southwest of Fayetteville, Washington County, Arkansas

Ongoing mapping since 2001 by Braden et. a.l, and Hudson, et. al. has differentiated the Bloyd Formation into lower, middle and upper parts.  Exerpt descriptions from the Fort Douglas quadrangle are listed below:

Bloyd Formation (Lower Pennsylvanian, Morrowan) - In this quadrangle the individual members within the Bloyd Formation cannot be recognized because its limestone units (Brentwood and Kessler Limestones) are either missing or have become shaly and sandy.  There are no other "marker zones" to divide the section into the recognizable members known from the type section in northwest Arkansas.  Therefore the Bloyd Formation is divided informally into lower and upper parts (Hudson et al., 2001) separated by the "middle Bloyd sandstone" (Zachry and Haley, 1975).  Approximately 480-760 ft. (144-233 m) thick.
     upper part - Consists of thin ripple-bedded to thick micaceous sandstones interbedded with clay to silty shales. The sandstones consist of fine to coarse-grained sub-angular to sub-rounded quartz.  They are light- brown to gray on fresh surface but weather dark-gray.  The shales are dark-gray to black on fresh and weathered surfaces. This interval contains many trace fossils and load features.  Approximately 200 - 320 ft. (60 - 98 m) thick. 
   "middle Bloyd sandstone" -  A thin to massive, medium to coarse-grained, cross-bedded quartz or iron-cemented sandstone with sub-angular to sub-rounded quartz grains.  Reddish, gray, or light-tan on fresh surfaces but weathers brown to orange-brown due to iron content.  The cross-bedded packages can be up to three feet thick and occasionally "overturned".  Contains abundant lycopod fossils and rounded quartz pebbles.  This sandstone forms a prominent bluff throughout this quadrangle and separates the upper from the lower part of the Bloyd Formation.  A pebble clast conglomerate is present at some localities at the base of this sandstone. In the southeastern corner of the quadrangle the "middle Bloyd sandstone" displays spheroidal weathering creating rounded columns.  This along with a maze of enlarged joints creates an outcrop known as "Buzzards' Roost".  Just across the drainage is a natural bridge known as "Rainbow Rock”. The "middle Bloyd sandstone" is unconformable with the lower part of the Bloyd Formation.    Approximately 80-120 ft. (24-37 m) thick.
    lower part - Consists of interbedded very thin to thin ripple-bedded micaceous siltstones and sandstones that are fine to medium-grained interbedded with black clay to silty shales.  Throughout the lower portion is black fissile clay to silty shales and thin sandstones interbedded with thin to thick-bedded fossiliferous carbonate to sandy carbonate layers.  Thin pebble conglomerates are present within the interbedded shales and sandstones.  The carbonate zones vary from red to gray on fresh and weathered surfaces and can be mottled.  Sometimes the fossiliferous sandy zones look "rotten" due to decalcification.  The quartz grains are medium-grained and sub-angular to sub-rounded.  This unit contains abundant trace fossils and loading features.  The contact between the lower part of the Bloyd Formation and the Prairie Grove is placed below a shaly layer conformable with the underlying massive calcareous sand of the Prairie Grove Member of the Hale Formation.  Approximately 200-320 ft. (60-98 m) thick.

Kessler Limestone above Dye Shale along Highway 540 south of Fayetteville
	Basal Dye Member caprock above Baldwin coal in the Woolsey Member at Evansville Mountain.
	Fossiliferous limestone in the Brentwood Member in northwest Arkansas near Japton.
“middle Bloyd sandstone” south of Huntsville, Arkansas.	Quartz pebbles and cross-bedding in the “middle Bloyd sandstone”.
Typical bluff exposure of the “middle Bloyd sandstone” near Mt. Judea, Arkansas.

Atoka Formation

Age: Pennsylvanian Period, Atokan Series
Distribution: In the Boston Mountains, Arkansas River Valley, and Ouachita Mountains of Arkansas; eastern Oklahoma, eastern New Mexico, and central and western Texas
Geology: The Atoka Formation is a sequence of marine, mostly tan to gray, silty sandstones and grayish-black shales. Some rare calcareous beds and siliceous shales are known. This unit has the largest areal extent of any of the Paleozoic formations in the state. It is the surface rock of the Boston Mountains and dominates the exposures in the Arkansas River Valley and the frontal Ouachita Mountains. It is also present in the southern part of the Ouachita Mountains. In the Arkansas River Valley and the frontal Ouachita Mountains, the Atoka Formation has been subdivided into upper, middle, and lower lithic members based on regionally mappable shale or sandstone intervals. The unit locally contains discontinuous streaks of coal and coaly shale in the Boston Mountains and Arkansas River Valley. Fossil plants are common throughout the section, but are generally poorly preserved. Poorly preserved invertebrate fossils are much less common and are found at several horizons. Trace fossils are relatively common in the Atoka Formation. The formation is conformable with the Bloyd Shale in the Boston Mountains and the Johns Valley Shale in the Ouachita Mountains. The unit may attain a thickness of 25,000 feet in the Ouachita Mountains, although only largely incomplete sections are known.
Original reference: J. A. Taff and G. I. Adams, 1900, U. S. Geol. Survey 21st Ann. Rept., pt. 2, p. 273.
Type locality: Named for Atoka, Atoka County, Oklahoma

Excerpt description from Fort Douglas quadrangle:

Atoka Formation (Middle Pennsylvanian, Atokan) - Consists of black to tan shales, interbedded with very thin to thin ripple-bedded micaceous siltstones, and thin to medium bedded, fine to very fine-grained sandstones with sub-angular to sub-rounded quartz grains.  The sandstones are tan to buff colored on fresh and weathered surfaces and contain clay pebbles, liesegang bands, horizontal trace fossils, and cross-beds. Occasionally the sandstones contain pebble conglomerate zones with external molds of fossils. The sandstones vary from 10 - 20 ft. (3 - 6 m) thick.  This contact is tentative and will be resolved with future mapping.  Approximately 40 - 300 ft. (12 - 91 m) thick.

Atoka Formation along Highway 540 south of Fayetteville.
	Atoka Formation on the Lurton quadrangle, Newton County, Arkansas.

References

Hudson, M.R., Murray, K.E., and Pezzutti, D, 2001, Geology of the Jasper Quadrangle Newton and Boone Counties, Arkansas: U.S.G.S. Miscellaneous Field Studies Map MF- 2356.

Zachry, D.L., and Haley, B.R., 1975, Stratigraphic relationships between the Bloyd and Atoka Formations (Pennsylvanian) of northern Arkansas: in Contributions to geology of the Arkansas Ozarks, Arkansas Geological Commission Miscellaneous Publication 12, p. 96-106.